Mediaplayer PV-MP3 / Videocard
Introduction
Mediaplayer PV-MP3 is a Audio/Video board, based on a Xilinx Spartan 2 FPGA, the board is designed for
multiple purposes, its basically a platform for audio/video projects (notice only mp3 supported for audio).
The board generates a PAL Composite and VGA signal, the generated PAL signal has a resolution off 780x576 pixels,
VGA signal supports both 640x480 and 800x600 pixels, both the PAL and VGA has a colour depth of 16 bit.
The board includes two graphic layers one for picture and one for OSD infomations, both layers can be shown
individual or blended together, with these to layers your can change OSD without changing the background image.
The address/databus is routed to an onboard connector, so that you can attach allmost any CPU board, which
uses the same bus structure as ARM7/ARM9.
Features:
- CPU Board: EzRegaNUT LPC2214 or EzRegaNUT AT91RM9200.
- Timing generation for PAL/VGA handled in onboard FPGA.
- PAL Composite / VGA output.
- Resolution PAL: 780x576 @ 16bit color depth, VGA: 640x480 and 800x600 @ 16bit color depth.
- 2 x 1 MB video RAM (round robin RAM access).
- MP3 Decoder (STA013) with 2 x Line Out connector.
- IR Receiver (Supports: Sony SIRCS 40KHz, 12/15 and 20 bit protocol).
- Interconnection connector (Addr-/Databus, RS485, SPI, I2C).
- PCB size: 100x160 mm.
