ezreganut kinetis K10
Introduction
EzRegaNUT Kinetis K10 is a CPU board, based on Freescale Kinetis K10 Cortex M4 running at 150MHz, the board is
designed to be used for multiple purposes, its basically a platform for projects, where the CPU power of an Cortex M4 is
required.
The Kinetis K10 does not have any SDRAM controller, this controller is implimented in the attached FPGA which resides on
the CPU addr/databuss, the SDRAM controller is running at 133MHz with 2 x 32MB SDRAM, the SDRAMs both are placed on
individual buses this is a big advantage in various applications where high throughput is required, approx. 192 MB/s for
each SDRAM can currently be transfered.
The SDRAM controller is implimented with a round robin architecture with a priority encoder, this way SDRAM can easily
be used for video generation, audio data processing "simultaneously".
Features:
- Freescale Kinetis K10 - 150MHz, 1MB FLASH, 64MB SDRAM, 8MB Serialflash.
- Xilinx Spartan 3, 1400A.
- Audio ADC/DAC with Line in/out.
- 8 KB Seriel EEPROM.
- JTAG connector (Kinetis, Xilinx FPGA).
- 10Mb Ethernet.
- Secure Digital Interface.
- Real Time Clock.
- Temperature sensor.
- 1 x RS232 (Console).
- 1 x RS485.
- 1 x CAN.
- 16 x 5V I/O.
- Extension connector (32bit address bus, 32bit databus, RS485, I2C).
- PCB size: 100x100 mm.
